Transport systems

We supply a range of different conveyor manipulators for surface treatment lines to transport racks, barrels and baskets in the lines. 

• Overhead transport systems
  - the most common transport system solution
  - the track of the transport system is located below the hall ceiling,
  - different range in terms of size, weight of goods and line capacity

• Gantry transport systems
  - the conveyor track is installed just above the line
  - the advantage of this solution is less space requirement in the vertical direction

• Side transport systems
  - the simplest variant of the transport system
  - the advantage of this solution is a very low space requirement of the entire conveyor
  - however, the conveyor system is limited by the maximum load capacity of the whole system

• 3D Cartesian conveyor – 3-axis movement 
  - the most advanced type of conveyor system 
  - in addition to the standard forward, backward, up and down movements, the conveyor can also move laterally
  - goods can move between different rows of the line on a single conveyor
  - one conveyor can serve several rows of the line 
  - this solution can reduce the number of rinsing positions in the entire surface treatment line
  - suitable for lines that are divided into several rows due to the layout of the hall

• Tilting and rotation for centrifugal baskets
  - this solution seeks to remove as much of the bath left on the goods as possible
  - tilting helps to remove the bath from the cavities of the goods

• Trolleys for transfer between rows of lines
  - used to transport goods between conveyors

These conveyors can be equipped with additional equipment

• Drip pan
  - helps to minimise the transfer of baths between tanks when transporting goods over the tanks - saving chemistry, reducing the waste water produced
  - prevents baths from dripping onto the line equipment itself - extends the line service life 
  - all captured droplets are discharged to the WWTP

• Exhausted cabin
  - helps to maintain a safe area around the line
  - harmful gases generated, when opening the lids of the tanks and transferring the goods between operations, are exhausted from the surroundings of the goods
  - protects the steel parts of the equipment from corrosion
  - protects the health of line operators

• Spray system 
  - inter-operational cleaning and other operations can take place directly on the conveyor without the need to immerse the goods in the bath
  - saving operating time and line size demands

• Blowing and flushing 
  - goods are flushed and blown directly on the conveyor
  - prevents the transfer of baths between operations - saving chemistry and rinse water, reducing the waste water produced
  - quality of the entire surface treatment process, as droplets are prevented from adhering to the goods

Tilting station

Exhausted and non-exhausted overhead conveyor booths

Side-type manipulator

Tilting racks to reduce bath out-take

3D cartesian conveyor

Gantry exhausted booth conveyor

Exhausted booth overhead conveyor with a drip pan